New Holland U80 Loader Landscaper Service Repair Manual
Service Repair Manual Contains:
General
Section Index – General
Standard Torque Specifications
Fluids and Lubricants
Metric Conversion Chart
Engine
Section Index – Engine
Engine and Radiator Removal and Installation
Stall Tests
Specification Details 4-390 Diesel Engine
After Cooler
Cylinder Head
Cylinder Block
Lubrication System
Balancer
Cooling System
Turbocharger
HX25W and HX30W Turbocharger
Fuel System
Section Index – Fuel System
Fuel System and Filters
Fuel Injectors
CAV Fuel Injection Pump
BOSCH Model VE Fuel Injection Pump
BOSCH Model A Fuel Injection Pump
Electrical
Section Index – Electrical
Removal and Installation of Electrical Components
Electrical Specifications and Troubleshooting
Batteries
Starter Motor – Denso
Instrument Cluster
Alternator
Steering
Section Index – Steering
Removal and Installation of Steering Components
Steering Specifications, Pressure Checks and Troubleshooting
Steering Control Valve
Steering Cylinders
Front Axle – Two Wheel Drive
Front Axle – Four Wheel Drive
Power Train
Section Index – Power Train
Removal and Installation of Power Train Components
Standard Transmission Specifications, Pressure Checks and Troubleshooting
Wheels and Tires
Rear Axle and Planetaries
Standard Transmission
Brakes
Section Index – Brakes
Removal and Installation of Brake Components
Master Cylinder
Hydraulics
Section Index – Hydraulics
Removal and Installation of Hydraulic Components
Hydraulic Specifications, Troubleshooting, and Pressure Checks
Cleaning the Hydraulic System
Hydraulic Pump
Loader Control Valve
Cylinders
Three Point Hitch Control Valve
Accumulator for Machines with Optional Ride Control
Solenoid Valve for Machines with Optional Ride Control
Flow Control Valve
Lock Valve
flow Control Priority Valve
Mounted Equipment
Section Index – Mounted Equipment
Pedals and Levers
Air Conditioning Troubleshooting For Systems With R-134a Refrigerant
Air Conditioning System Service For Systems With R-134a Refrigerant
Air Conditioning Components Service For Systems With R-134a Refrigerant
Loader
ROPS Cab and Canopy
Pedestal Seat
Schematics
Electric Schematic and Hydraulic Schematic Foldout
New Holland U80 Loader Landscaper Service Repair Manual
If you are looking for a service checklist for the engine of a New Holland U80 Loader Landscaper, here is a general list of tasks that you may want to consider:
1. Engine Oil and Filter:
– Check the engine oil level and condition.
– Replace the engine oil and oil filter as per the manufacturer’s recommendations.
– Use the recommended oil viscosity and quality specified by the manufacturer.
2. Air Filter:
– Inspect the air filter for dirt, debris, or damage.
– Clean or replace the air filter as necessary.
– Ensure the air filter housing is properly sealed to prevent dust from entering the engine.
3. Fuel System:
– Check the fuel filter for any contaminants or signs of clogging.
– Replace the fuel filter if necessary.
– Inspect fuel lines and connections for leaks or damage.
– If equipped, drain the water separator and replace the fuel if water is present.
New Holland U80 Loader Landscaper Service Repair Manual
4. Cooling System:
– Check the coolant level in the radiator or coolant reservoir.
– Inspect the radiator and cooling system for any leaks or damage.
– Clean the radiator and cooling fins from any debris or dirt.
– Inspect and replace the radiator cap if needed.
5. Belts and Hoses:
– Inspect the condition of drive belts and cooling system hoses.
– Look for any signs of wear, cracks, or leaks.
– Replace any damaged or worn belts or hoses.
6. Battery and Electrical System:
– Inspect the battery terminals for corrosion and clean if necessary.
– Check the battery charge and ensure proper voltage.
– Inspect wiring connections for any loose or damaged wires.
– Test the alternator output and ensure proper charging.
7. Engine Cooling Fan:
– Inspect the engine cooling fan blades for any damage.
– Ensure the fan spins freely and is properly secured.
– Check the fan belt tension and adjust if necessary.
8. Engine Mounts:
– Inspect the engine mounts for signs of wear or damage.
– Replace any worn or damaged engine mounts.
9. Exhaust System:
– Inspect the exhaust system for any leaks or damage.
– Ensure the exhaust system components are properly secured.
– Replace any damaged or corroded parts as necessary.
It’s always recommended to refer to the operator’s manual or consult with a qualified technician for the most accurate and up-to-date information regarding the engine service requirements for your specific machine.