John Deere Te gator run time Operators Manual
John Deere Te Gator Utility Vehicle Operators Manual
Electrical system 48 V 12 kWh Eight Trojan T-105 batteries
Brake type Dual rear wheel mechanical drum
Speed 20.92 km/h 0-13 mph (Can be adjusted with handheld programmer)
Front suspension Independent, spring over shock, single A-arm
Payload capacity 408 kg 900 lb. john deere te gator charger
(north American Version)
This is the COMPLETE Operators Manual for the John Deere TE Gator Utility Vehicle.
Product Identification Numbers:
This Manual Describes Procedures for Operation, Handling, Lubrication, Maintenance, Checking, and Adjustment. it’ll assist the operator or every person Realize Peak Performance Through Effective, Economical and Safe Machine Operation and Maintenance.
John Deere Te gator run time Operators Manual
Operators Manual Contains:
Safety Labels
Safety
Operating
Replacement Parts
Service Intervals
Service Battery
Service Electrical
Service Miscellaneous
Troubleshooting
Storage
Assembly
Specifications
Warranty
Index
Model Specification: John Deere TE Gator Utility Vehicle
Edition: North American Version
Language: English
Total Pages: 80
File Format: PDF
Requirements: Adobe PDF Reader
Compatible: All Versions of Windows & Mac, Linux OS, Iphone, Ipad, Android etc…
John Deere Te Gator Batteries
The Gator TE Utility Vehicle features a motor powered by a 48-V electrical system.
This electrical system provides plenty of power to accelerate faster, carry loads, climb hills better, and perform evenly until recharge, Through the use of a separately excited controller, the Gator TE offers the following unique features:
Dynamic braking
The motor brakes when the operator lets off the accelerator; it is not a substitute for the brakes
Overspeed control
Reduces exposure to high-speed situations even when descending a hill; under normal conditions with a light load, the vehicle will not freewheel down an incline
Roll away
The electronic brake limits the vehicle speed to approximately 3.2 km/h (2 mph) and prevents the vehicle from freewheeling down a grade when left unattended Reduced speed in reverse
Controls the vehicle speed to approximately 13 km/h (8 mph) without the loss of torque.
Anti-rollback
When stopped on a grade, this feature prevents the vehicle from freewheeling in the opposite direction of the original travel direction
Regeneration
Energy is transformed back into the batteries when the vehicle travels faster than the set maximum speed; regeneration also occurs when dynamic braking is engaged; an estimated 3 percent to 5 percent regenerative energy is put back into the batteries during a day of work
Diagnostics
An onboard computer diagnoses the electrical system; using a flashing indicator light, a sequence of flashes indicates where the controller is having problems communicating
Speed control
The controller is set for a vehicle speed of 20.92 km/h (13 mph)
Key-off control
Permits the function of the interlock and safety features with the key in the off position
Directional change control
When switching from forward to reverse, the machine will come to a complete stop and then changes directions; this prevents a whiplash effect and potential high stress on the drivetrain
Power is transferred through a transaxle with helical gearing for low gear noise.